Review of the Marshall DSL40CR amplifier. Where to buy it?

I’ll tell you how this post is built. First I list the features of the Marshall DSL40CR amplifier. Then you have a video or two, purchase links and useful comments from other users and then you have one of the most useful parts; comparison tables with similar amplifiers so you can compare.

  • Reissue series – authentic DSL sound
  • Power: 40W
  • 2 footswitchable channels with classic gain and ultra gain
  • Assembly: 12″ Celestion V Type loudspeaker
  • Preamp tubes: 4 x ECC83
  • Power tubes: 2 x EL34
  • Independent volume and gain controls for both channels
  • Clean and Crunch Modes in the Classic Gain Channel
  • Lead 1 and Lead 2 modes in the Ultra Gain channel
  • Classic sound control with bass, middle and treble
  • Presence control
  • Tone-shift circuit
  • Variable resonance control
  • Pentode- / triode switch
  • Digital reverb independent for each channel
  • Speaker outputs: 2 x 16 ohms, 1 x 8 ohms and 1 x 16 ohms
  • Includes double footswitch (channel selection and reverb on / off)

review marshall-dsl40cr

This amplifier usually has a price around 569.00 €

Now that we’ve seen the features of this amplifier Marshall DSL40CR watch these related videos to learn more.

Marshall DSL40CR Demo and Review..is this the best amp at this price???

Post you may be interested in

Some comments from people who come to the forum about this model:

Comment:

First I would like to thank Thomann for all their help & advice on my journey to finding the right amp, they just cannot help you enough, kudos to all of them.
This amp is superb, Marshall at it’s best.
I have an American Professional Jaguar, on the clean channel it brings out the best in this beautiful guitar, crisp & clear tones to a subtle crunch & everything in between, the classic crunch gives you THE classic sound of a fender guitar & a Marshall amp at it’s finest.
The Ultra gain channel gives some great Les Paul / SG type tones, plus the presence & tone switch give some great nuances as well.
I have used this in my bedroom on the half power setting & it still sounds great at really low volume.
I have an outside barn with a purpose built stage & I have had this amp cranked up as loud as possible, & man is this thing LOUD !!!!!
Loud without losing any sound quality at all.
You won’t need a tube screamer or any such pedal here, the only negative thing I can say is that the digital reverb is not that good, but to be honest I have not come across any amp with a good reverb. I have a Marshall RF-1 Reflector Reverb pedal that does that.
The two way footswitch is a great for switching channels & works perfectly.
The amp is solidly built & looks fantastic.

Comment:

Very good product for the price. Very versatile.
Good clean sound for a marshall typa of amp and also very good overdrives.
The clean channel (green mode) as a bit lower volume then the others but you can compensate that with the 2 master volumes, so thats not a deal-breaker.
Also, if you use buffered by-pass pedals on the FX loop, when you turn it on you will notice a slith decrease on the volume aswell. For me, I keep the FX Loop always on and just turn on/off the pedals I want to use so that is not a problem.
If you like to use dirt pedals, this amps is also a great for that cuz it accepts pedals very well.
The key trick for this amp is very simple: the louder it gets, the better it sounds. However, is very easy to dial good tones in any volume, since bed-room practice levels to any live gig.
I have this amp for about 6 months now and I have nothing negative to point out. still in love with it. highly recomended.

Marshall DSL40CR vs Marshall DSL20CR

The amplifier Marshall DSL40CR is usually 140 € more expensive than Marshall DSL20CR.

Marshall DSL40CR

Marshall DSL20CR
  • Reissue series – authentic DSL sound
  • Power: 40W
  • 2 footswitchable channels with classic gain and ultra gain
  • Assembly: 12″ Celestion V Type loudspeaker
  • Preamp tubes: 4 x ECC83
  • Power tubes: 2 x EL34
  • Independent volume and gain controls for both channels
  • Clean and Crunch Modes in the Classic Gain Channel
  • Lead 1 and Lead 2 modes in the Ultra Gain channel
  • Classic sound control with bass, middle and treble
  • Presence control
  • Tone-shift circuit
  • Variable resonance control
  • Pentode- / triode switch
  • Digital reverb independent for each channel
  • Speaker outputs: 2 x 16 ohms, 1 x 8 ohms and 1 x 16 ohms
  • Includes double footswitch (channel selection and reverb on / off)
  • Reissue series – authentic DSL sound
  • Power: 20W
  • 2 footswitchable channels with classic gain and ultra gain
  • Equipped with 12″ Celestion Seventy-80 speakers
  • Preamp tubes: 3x ECC83
  • Power tubes: 2x EL34
  • Tone-shift key for center configuration
  • Bass switch that complements a resonant bass boost
  • Independent volume and gain controls for both channels
  • Common sound control for treble, mid and bass
  • Emulated line output
  • Serial FX loop
  • Includes footswitch

And then a video of the amplifier Marshall DSL20CR

Marshall DSL20CR Guitar Amplifier Combo Review and Demo!

If you want to know more about this option, click on the following link to see the Marshall DSL20CR review

Marshall DSL40CR vs Marshall Origin 50C Combo

The amplifier Marshall DSL40CR is usually 144 € more expensive than Marshall Origin 50C Combo.

Marshall DSL40CR

Marshall Origin 50C Combo
  • Reissue series – authentic DSL sound
  • Power: 40W
  • 2 footswitchable channels with classic gain and ultra gain
  • Assembly: 12″ Celestion V Type loudspeaker
  • Preamp tubes: 4 x ECC83
  • Power tubes: 2 x EL34
  • Independent volume and gain controls for both channels
  • Clean and Crunch Modes in the Classic Gain Channel
  • Lead 1 and Lead 2 modes in the Ultra Gain channel
  • Classic sound control with bass, middle and treble
  • Presence control
  • Tone-shift circuit
  • Variable resonance control
  • Pentode- / triode switch
  • Digital reverb independent for each channel
  • Speaker outputs: 2 x 16 ohms, 1 x 8 ohms and 1 x 16 ohms
  • Includes double footswitch (channel selection and reverb on / off)
  • Gain boost function
  • Two voicings (Normal, High Treble), which can be mixed steplessly via the tilt control
  • Switchable power reduction for full sound in any environment
  • 1 channel
  • Power: 50 watts
  • Preamp tubes: 3x ECC83 (12AX7)
  • Power tubes: 2x EL34
  • Equipped with: 1x 12″ Celestion G12N-60 Midnight speaker
  • Controls: Gain – Tilt – Bass – Middle – Treble – Master – Presence
  • Switches: Power On / Off – Output Low / Mid / High – Gain Boost (Pull Volume)
  • Serial effect grinding path
  • Connectors: Input (6.3 mm jack) – DI Out (6.3 mm jack) – FX Send & Return (2 x 6.3 mm jack) – Footswitch (6.3 mm jack)
  • Speaker Outputs: 3 x 6.3 mm jack (16 ohms / 8 ohms)
  • Dimensions (W x D x H): 580 x 245 x 480 mm
  • Weight: 18.2 kg
  • Includes footswitch

And then a video of the amplifier Marshall Origin 50C Combo

Marshall Origin 50C Amplifier Review - Is this the Redeeming Amp of the Series?

If you want to know more about this option, click on the following link to see the Marshall Origin 50C Combo review

Marshall DSL40CR vs Vox AC15 C1

The amplifier Marshall DSL40CR is usually 54 € more expensive than Vox AC15 C1.

Marshall DSL40CR

Vox AC15 C1
  • Reissue series – authentic DSL sound
  • Power: 40W
  • 2 footswitchable channels with classic gain and ultra gain
  • Assembly: 12″ Celestion V Type loudspeaker
  • Preamp tubes: 4 x ECC83
  • Power tubes: 2 x EL34
  • Independent volume and gain controls for both channels
  • Clean and Crunch Modes in the Classic Gain Channel
  • Lead 1 and Lead 2 modes in the Ultra Gain channel
  • Classic sound control with bass, middle and treble
  • Presence control
  • Tone-shift circuit
  • Variable resonance control
  • Pentode- / triode switch
  • Digital reverb independent for each channel
  • Speaker outputs: 2 x 16 ohms, 1 x 8 ohms and 1 x 16 ohms
  • Includes double footswitch (channel selection and reverb on / off)
  • All-tube
  • Power: 15 Watt
  • 12″ Celestion G12M Greenback Speaker
  • 3x 12AX7 (ECC83) Preamp, 2 x EL84 Power amp
  • Inputs: Input Normal, Top Boost, Volume, Treble, Bass, Reverb, Tremolo (Speed and Depth), Standby, Power switch, Tone Cut Regulator
  • Back: 2x Speaker outputs
  • Impedance Switch (8 or 16 Ohm)
  • Dimensions (W x D x H): 602 x 265 x 456 mm
  • Weight: 22 kg
  • Optional footswitch: Art.198735 (not included)
  • Optional suitable case: Art.317592 (not included)

And then a video of the amplifier Vox AC15 C1

Vox AC15 Review & Demo (AC15c1)

If you want to know more about this option, click on the following link to see the Vox AC15 C1 review

Marshall DSL40CR vs Boss Katana 100 MKII

The amplifier Marshall DSL40CR is usually 260 € more expensive than Boss Katana 100 MKII.

Marshall DSL40CR

Boss Katana 100 MKII
  • Reissue series – authentic DSL sound
  • Power: 40W
  • 2 footswitchable channels with classic gain and ultra gain
  • Assembly: 12″ Celestion V Type loudspeaker
  • Preamp tubes: 4 x ECC83
  • Power tubes: 2 x EL34
  • Independent volume and gain controls for both channels
  • Clean and Crunch Modes in the Classic Gain Channel
  • Lead 1 and Lead 2 modes in the Ultra Gain channel
  • Classic sound control with bass, middle and treble
  • Presence control
  • Tone-shift circuit
  • Variable resonance control
  • Pentode- / triode switch
  • Digital reverb independent for each channel
  • Speaker outputs: 2 x 16 ohms, 1 x 8 ohms and 1 x 16 ohms
  • Includes double footswitch (channel selection and reverb on / off)
  • Power: 100W
  • Equipped with 12″ custom speakers
  • 5 Amp types: Clean, Crunch, Lead, Brown & Acoustic
  • 5 Independent effects: Booster, Mod, FX, Delay and Reverb – 3 of them simultaneously
  • 4 Memory slots for amplifiers and effects settings plus panel setting
  • Power Amp input for the use of multi-effect devices
  • Power Control (0.5 / 50/100 watts) for fully turned amp sound at any volume
  • Controls: Amp Type, Gain, Volume, Bass, Middle, Treble, Booster / Mod, Delay / FX, Reverb, Master & Power Control, Sounds
  • Updated Boss Tone Studio sound customisation software with over 60 different Boss effects, channel and global EQs, customisable routing, and more (free on Bosstonecentral.com)
  • Dimensions (W x D x H): 530 x 248 x 484 mm
  • Weight: 14.8 kg
  • Suitable footswitch: Boss GA-FC Art.431181 (not included)
  • Suitable dust cover: Art.438090 (not included)

And then a video of the amplifier Boss Katana 100 MKII

MKII: Boss Katana 100 Watt Amp MK2 Overview | Video Demo

If you want to know more about this option, click on the following link to see the Boss Katana 100 MKII review

Where to buy this amplifier Marshall DSL40CR

Thomann

  • Free Shipping.
  • Full warranty. If you have any problems, they take care of everything.
  • 100% reliable payment.
  • Leader in trouble-free shipping.
  • Usually Best price.
  • Best Reputation: They are the leading online store in Europe and have the best catalogue and information.

Amazon

  • Free Shipping and possibility of shipping in one day with Amazon Premium.
  • Full Guarantee but they are no experts in music equipment.
  • Sometimes better price.
  • He’s got worse stock than Thomann.

Also look at these models with a similar price and features:

Jaime Echagüe

Hi! I'm Jaime Echagüe, a musician and an authentic fan of musical instruments. With this blog I want to give general information about musical instruments in an easy, direct and honest way. I hope you enjoy my website and that you find it very useful.

Click Here to Leave a Comment Below