Review of the Fender SQ Bullet Tele MN White Ltd Electric guitar. Where to buy it?

Fender Squier Bullet Telecaster MN White ; e-guitar, poplar body, maple neck, maple freaboard, “C” shape, radius 9,5″ (241mm); 648mm scale, 42mm (1,650″) nut width, 21x narrow tall frets, 2x standard telecaster single coil pickups, 3-ply black pickguard, 1x volume, 1x tone konwb, 3-way swtich, vintage tuner, 6 saddle strings through body tele bridge, nickel hardware, finish White

• Body shape: Arched Modern Comfort
• Body: Mahogany
• Flamed maple veneer
• 5-Piece neck: Maple/Mahogany
• Neck attachment: Neck-through-body
• Fretboard: Macassar ebony
• Fretboard inlays: White 6 mm offset pearloid
• Glow-in-the-dark position markers on the fretboard’s edge
• Neck profile: Slim Modern C (Thickness at the 1st fret: 21 mm – Thickness at the 12th fret: 23 mm)
• Dual-action truss rod
• Matching headstock
• Body binding: Wood
• Scale: 648 mm
• Fretboard radius: 355.6 mm
• Nut width: 42 mm
• Nut: Graph Tech TUSQ
• Frets: 24 Jumbo stainless steel
• Pickups: EMG Retro Active Hot 70 Ceramic (bridge) humbucker & EMG Retro Active Hot 70 Alnico-5 (neck) humbucker
• Controls: Master volume- and master tone
• 3-Way switch
• Bridge: WSC HPS-6 Custom hardtail
• Machine heads: Grover locking
• Hardware: Black
• Strings: .010″ – .046″
• Colour: Black Blue Flame Burst Satin
• Made in Indonesia

Fender Squier Bullet Telecaster MN White ; e-guitar, poplar body, maple neck, maple freaboard, “C” shape, radius 9,5″ (241mm); 648mm scale, 42mm (1,650″) nut width, 21x narrow tall frets, 2x standard telecaster single coil pickups, 3-ply black pickguard, 1x volume, 1x tone konwb, 3-way swtich, vintage tuner, 6 saddle strings through body tele bridge, nickel hardware, finish White

• Body: Basswood
• Bolt-on neck: Maple
• Fretboard: Amaranth
• Fretboard inlays: Dots
• Neck profile: Modern C
• Fretboard radius: 350 mm
• Scale: 648 mm
• Nut width: 42 mm
• Double action truss rod
• 22 Frets
• Pickup: 1 Humbucker (bridge) and 2 single coils (middle and neck)
• 1 Volume control and 2 tone controls
• 5-Way pickup switch
• Synchronised tremolo
• Die-cast machine heads
• Black hardware
• Ex-factory stringing: .009″ – .042″
• Colour: Black, matte

Fender Squier Bullet Telecaster MN White ; e-guitar, poplar body, maple neck, maple freaboard, “C” shape, radius 9,5″ (241mm); 648mm scale, 42mm (1,650″) nut width, 21x narrow tall frets, 2x standard telecaster single coil pickups, 3-ply black pickguard, 1x volume, 1x tone konwb, 3-way swtich, vintage tuner, 6 saddle strings through body tele bridge, nickel hardware, finish White

• Deluxe Series
• Mahogany body
• Flamed maple arched top
• Set-in mahogany neck
• Roasted jatoba fretboard
• “C” Neck profile
• Fretboard radius: 350 mm
• 24 Frets
• Pearloid dots fretboard inlays
• Neck and body binding
• Scale: 635 mm
• Nut width: 42 mm
• Graphite nut
• 2 Roswell HAF AlNiCo-5 open coil humbucker pickups
• 3-Way switch
• 1 Volume- and 1 tone control with push/pull function for coil split
• DLX chrome hardware
• Wilkinson WVPC tremolo
• DLX machine heads
• Colour: Black Flame

Fender Squier Bullet Telecaster MN White ; e-guitar, poplar body, maple neck, maple freaboard, “C” shape, radius 9,5″ (241mm); 648mm scale, 42mm (1,650″) nut width, 21x narrow tall frets, 2x standard telecaster single coil pickups, 3-ply black pickguard, 1x volume, 1x tone konwb, 3-way swtich, vintage tuner, 6 saddle strings through body tele bridge, nickel hardware, finish White

• Complete DIY (do it yourself) kit
• Bolt-on neck attachment
• Rengas body (wood colour may vary)
• Maple neck
• Double action truss rod
• Amaranth fretboard
• Dots fretboard inlays
• Radius: 350 mm
• 22 Frets
• Scale: 648 mm
• Nut width: 42 mm
• Truss rod
• 3 Ceramic single coil pickups
• Electronics: 1 Volume, 2 Tone, 5-Way switch
• Chrome hardware
• Diecast machine heads
• Tremolo
• .009 – .042 Strings
• Colour: Natural

Note: The body and neck have been primed with pore filler, making them suitable for the direct application of lacquer finishes. Before the application of stains or other surface treatments, the primer must be first removed via sanding.

Note: A certain degree of skill in handiwork is required for successful assembly of the guitar.